Arwen's meanderings

Hi everyone and welcome to my dinghy cruising blog about my John Welsford designed 'navigator' named Arwen. Built over three years, Arwen was launched in August 2007. She is a standing lug yawl 14' 6" in length. This blog records our dinghy cruising voyages together around the coastal waters of SW England.
Arwen has an associated YouTube channel so visit www.YouTube.com/c/plymouthwelshboy to find our most recent cruises and click subscribe.
On this blog you will find posts about dinghy cruising locations, accounts of our voyages, maintenance tips and 'How to's' ranging from rigging standing lug sails and building galley boxes to using 'anchor buddies' and creating 'pilotage notes'. I hope you find something that inspires you to get out on the water in your boat. Drop us a comment and happy sailing.
Steve and Arwen

Saturday 10 September 2016

Making Arwen pretty and respectable again.....

At the end of a sailing season, which this year has finished somewhat prematurely due to an elbow fracture last week, my thoughts turn to maintenance and repositioning of things based on the experiences of this passing sailing season.

How I paint the dings, sand and revarnished woodwork etc outside during the winter months exercises some thought. I am wondering if I need to find the corner of a yard somewhere under cover and strip out everything in Arwen and then fill dents, sand and then repaint her so she is ready for spring?
I perhaps need to investigate local boat building yards and see what space they have and how much they would charge.

Alternatively, I wait for spring. Over a weekend, with her on the trailer on the road outside, I could sand the interior varnish woodwork and get that done and then on another warm weekend, do the interior cockpit paintwork and re-coat that.

Would I need to sand back to wood? Or sand back lightly to give new purchase to new topcoats? I really have no idea so if anyone knows about these things, advice as always, would be most welcome.

2 comments:

Stuart said...

I take the view that stripping back to bare wood is time consuming and messy, so if I can avoid it, I will! Purists will demand stripping EVERYTHING. However, if there are bits of varnish/paintwork that look as though they've flaked away from the wood, then you really have to get down to the wood. Ususally damp will have got into the wood around the dodgy area, so this must be bone dry before starting the paintwork. You can help it along with a hair drier! A sound base coat is a must, so appropriate primer for paintwork and a diluted varnish (see what the tin recommends) for brightwork is a starter. A fine sanding between coats provides a key for subsequent coats and removes midges and dust particles. Keep a brush totally dedicated to varnish! It will all take time, so the sooner you start, the better (don't wait until Spring!)and don't rush any stage. If in doubt, have a practice on some scrap wood.
I await the flood of alternative approaches!
Stuart

steve said...

That's really helpful Stuart. Much appreciate time you gave to reply. Thanks 😊