Some comments made by Joel, John and Peter (thanks by the way folks – appreciate the time and thought).
1. Anchors need to be easily and quickly deployed
2. Consider putting anchor on a bow roller with pins through bow roller cheeks and end of anchor shank to hold it in place. The chain and rode is then flaked into the ‘chain’ well and a secure top of some form added to hold it all in place
3. Alternatively, secure with Velcro straps around the anchor shank and stem post
4. Weight up front will balance the weight of outboard at the rear; helmsperson needs to sit as far forward as possible
Well I’ve gone for the strap option initially and will see how it goes; however my friend, on his boat, has a bow roller and pin arrangement which seems to be a very safe and effective way of dealing with the anchor.
I guess a ‘try it and see’ approach is now needed.
Steve
1. Anchors need to be easily and quickly deployed
2. Consider putting anchor on a bow roller with pins through bow roller cheeks and end of anchor shank to hold it in place. The chain and rode is then flaked into the ‘chain’ well and a secure top of some form added to hold it all in place
3. Alternatively, secure with Velcro straps around the anchor shank and stem post
4. Weight up front will balance the weight of outboard at the rear; helmsperson needs to sit as far forward as possible
Well I’ve gone for the strap option initially and will see how it goes; however my friend, on his boat, has a bow roller and pin arrangement which seems to be a very safe and effective way of dealing with the anchor.
I guess a ‘try it and see’ approach is now needed.
Steve
3 comments:
A bow roller is nice admittedly, but experience with a couple of larger boats, clearing the bowsprit was always a problem - the well looks like a good safe place to keep things, couple of lashings and Bob's your Mum's brother.
Conventional wisdom is to keep heavy weight out of bow and stern. You should not sail a small boat with an outboard on the transom. You need to worry about inertia, not just weight. You need bow and stern to lift lightly to waves. They will not do this if you put heavy weights up there.
Thanks for comment Roger. I sort of understand the bow weight issue which is why I have asked for the advice. The outboard one - well that is an issue for me as a new sailor. I guess with time and practice I will be less reliant on it and my sailing skills will develop to the point where I can sail on and off moorings; back to QAB pontoon etc with more confidence than I have at present.
I have to say I am amazed at the outboard fact; I see so many daysailing dinghies with outboards onboard; do you always sail without one on your small boat or do you have one on occasions?
thanks for the comments and time - appreciated.
Steve
Post a Comment