The last few times Arwen has jammed on her trailer at launch and I have had to resort to roping her down part of the slipway to get the trailer deep enough that she just floats off.
It took me time but finally I discovered the issue - two things - one a badly positioned keel roller (which jammed against the aft end of the centreboard casing) and secondly, the brass skeg band had come adrift and was digging into the roller on occasions.
And so I jacked up Arwen and put her on blocks along the trailer keel support - moved the roller along so it sat under the centreboard casing in a better position.
Hopefully this will work. A good job I did it though as I have discovered some rot in the skeg and some touch up painting on the hull bottom that needs doing. That winter maintenance list is growing again!
No comments:
Post a Comment
Thanks for taking a look at my blog. All comments and advice are welcome - drop me a few lines. You can always find videos about Arwen at www.youtube.com/c/plymouthwelshboy. Look forward to hearing from you.
Steve