Monday, 29 January 2018

Dinghy cruising: building a sleeping platform for my Welsford navigator dinghy

Thanks to Joel Bergen for this design which he did for his navigator 'Ellie'.

I now have a semi completed sleeping platform for my aft port cockpit side. The sleeping platform slips under the thwart 3cm coaming overhang and then rests on the slotted uprights. The whole lot can be taken part and collapsed into the floor well where flat straps hold them secure.

So a bit more sanding and then several layers of varnish. finally some thin neoprene strip will be stuck to edges to act as 'cushioning'.

I look forward to testing it come Easter!




at

4 comments:

  1. Enrico29 January 2018 at 22:05

    This is a great idea! You increase the range of your sailing voyages and have more fun!

    ReplyDelete
  2. steve29 January 2018 at 22:08

    It was Joel's idea - brilliant concept

    ReplyDelete
  3. Joel Bergen30 January 2018 at 04:42

    Looks great, Steve! Nice and sturdy. I need to re-make mine out of thicker plywood.

    ReplyDelete
  4. steve10 February 2018 at 13:21

    hey Joel, belated happy new year - how is retirement going? I may have done overkill- 12mm ply but we'll see; just finished Danish oiling it all. Now waiting for weather to improve so can go camp cruising

    ReplyDelete

Thanks for taking a look at my blog. All comments and advice are welcome - drop me a few lines. You can always find videos about Arwen at www.youtube.com/c/plymouthwelshboy. Look forward to hearing from you.
Steve